KS Audio
The Sonic Truth
Navigation
Sign up to receive news on KS Audio / KS Digital products (and discounts!)
KS Telephone: +1 727 447 9656
Email
Join KS Audio on Facebook
Join KS Audio on Twitter
Join KS Audio on YouTube

CPD W1 Powered | C W1 Unpowered Subs

Subwoofers

KS Audio Live/PA CPD W1 powered and C W1 unpowered loudspeakers subwoofers
KS Audio Live/PA CPD W1 powered and C W1 unpowered loudspeakers subwoofers back
KS Audio Live/PA CPD W1 powered and C W1 unpowered loudspeakers subwoofers amp
KS Audio Live/PA CPD W1 powered and C W1 unpowered loudspeakers subwoofers close

CPD W1 Powered | C W1 Unpowered Subs

In spite of its small stature, the C W1 and CPD W1 delivers a very deep, powerful, dynamic sound. The speaker cabinet is a classic reflex design -- 1x15” -- and obtains performances of the highest quality. The CPD W1 is driven by a 700 W rms PWM amplifier.

What makes the C W1 / CPD W1 unique is the highly durable long throw driver with a 100mm voice coil and reinforced cone, plus a directivity for frequencies in the range of 40Hz. The two bass reflex openings have a large exponential cross-sectional contour that is particularly high in efficiency with minimal distortion at the tunnel openings. The small size of the C W1 and CPD W1 makes them especially useful for venues where little space on the stage is available, or where it must be integrated into a stage portal. With an M20 threaded pole mount, the C W1 / CPD W1 becomes an ideal stand base for many of the KS Audio CPD mid / hi cabinets (we recommend two of the CW 1 / CPD W1 subs to bring the top boxes CPD 10 / CPD 12 to the ideal height for the audience).

From the left and right channel bass frequencies, the CPD W1 creates a summed, loss-free, and highly efficient mono signal.

The speaker cabinet construction, like all KS Audio systems, is built from birch plywood with an extremely robust charcoal colored polyurethane coating. At your request, the finish available can be changed to any desired color from the RAL color charts. Handholds, an M20 pole mount, and a protective grill (with or without acoustic foam) are further features of this high quality product.

The rear mounted FIR CONTROL DSP / PWM amplifier of the CPD W1 operates very efficiently without the need of a cooling fan. The FIR crossover and filter is specially matched to the driver, with corresponding compressors and limiters to ensure safe operation. The electronically balanced input is in the form of XLR connectors. In addition to the power switch, the control panel also has a selectable digital volume / delay control to individually adjust for each venue, and offers a digital delay reaching up to 40m (120ft) for decentralized PA systems.

With a 2-channel redundancy, the volume control allows for adjustment with a range of +/- 9dB. Another special feature is the DSP Controller with its integrated delay, which allows on-site adjustment, or the creation of a focused-directivity bass array without any additional equipment. The limiter prevents overloading and provides for frequency response correction. All functions of the DSP controllers can be adjusted and controlled over the ethernet network. The most important parameters are presented on an LED display and can be adjusted directly on the unit.

C W1: Same as CPD W1 but unpowered.

KS Digital Studio Monitor Testimonials
Ajax Loader Gif

KS Audio PA Live Speaker Testimonials
Ajax Loader Gif

KS Audio - KS Digital Speaker Details
Ajax Loader Gif